diymainimage

Bangle box

Materials

1. Cardboard box 2. Colour papers and printed sheets 3. Cardboard pipe 4. Packing tape 5. Scissor 6. Cutter 7. Pencil 8. Ruler 9. Glue gun 10. Mirror 11. Bead 12. Satin ribbon 13. Lace 14. Golden beads

Materials

Instructions

Steps
Step 1
Take the cardboard box and seal the box from all sides using a packaging tape. Now, draw 4cm lines on all the 3 sides of the box and cut the three sides. Cut the pink paper of the size of the sides and bottom and also inner base and top for the box.
Steps
Step 2
For preparing the cover, take some polka dotted printed pink sheets. Take one sheet and measure the back of box. With the help of ruler and pencil, draw the measurements of the box on the sheet and stick it using glue
Steps
Step 3
Take small mirror remove it from the frame. Now stick cardboard sheet and for better look glue pink sheet bigger than the mirror from all the sides. Now take 4 cardboard rings and cover all the rings with pink satin lace and let the rings dry. Repeat the same for both the pipes and give them a decorative look.
Steps
Step 4
Now stick the pipe holder to the cardboard box. Now place the decorative bangle pipes on the holder. To give an attractive look to the mirror, frame all the 4 sides of the mirror using the golden bead lace and some lace to decorate the inner top.
Steps
Step 5
On the top of the cover, apply some glue and stick the pretty white lace on it. Also take a big bead and stick it on the bottom of the box. With this, you will be able to open and close the box. Here is an awesome and decorative DIY bangle box ready

తెలుగు లోకి
మారండి