diymainimage

Christmas tree Box

Materials

1. Cardboard box 2. Glue 3. Sponge brush 4. Scissors 5. Ruler

Materials

Instructions

Steps
Step 1
Cut off the tops of box. To make a “plus sign”-shaped piece of fabric, place the box in the center of the fabric, and then measure 8 inches from the edge of box on all four sides.
Steps
Step 2
Next, add one extra inch to all four sides, and then cut the fabric to this size. Using a sponge brush, apply glue to one side of the box.
Steps
Step 3
Pull the fabric up and affix it to the box. At the base of the box, cut a small slit on both corners of the fabric. Apply glue to next box side, and then take the extra allowance of fabric around the side of the box, creating a nice, clean corner.
Steps
Step 4
Repeat steps for the remaining sides. On the final side, make sure to fold down both edges to create nice, clean edges before you affix the fabric to the box side.
Steps
Step 5
Apply glue to the fabric folded over the inside of the box to make sure the fabric is secure. Let dry for a few hours. Slide in your tree and have a perfect decoration!

తెలుగు లోకి
మారండి