diymainimage

Envelopes

Materials

1. Paper 2. Gold braid 3. Ribbon 4. Scissors 5. Punch 6. Glue Ruler 7. Pencil 8. Small plastic bags 9. Roli & rice

Materials

Instructions

Steps
Step 1
Cut a rectangle (26 x 19 cms) of the paper and draw four rectangles (7 x 2cms) on the corners. Fold all four outer rectangles inwards and crease the lines. Fold the excess edge on the horizontal flaps inwards, so that the flaps meet in the centre.
Steps
Step 2
Punch holes in the centre of each flap. Apply a little glue on the edges on the top & bottom flap. Paste them inwards. Similarly, apply glue and paste the excess paper.
Steps
Step 3
Once the envelope is ready, tie it up with a ribbon. Take gold braid & ribbon. And insert them in one of the holes, holding the braid over the ribbon. Carefully & firmly pull the ribbon over the sides.
Steps
Step 4
Apply a glue drop or glue on both ends of the ribbon & braid, after inserting it in the holes. Paste them inwards, to hold them in place under the flaps of the envelope.
Steps
Step 5
Fill the small plastic packets with roli, rice . Place them in the packet. Take about 25 cms of the gold braid & insert it inside of each hole. Make sure to insert it, from the inside of the envelope. Tie it up tightly & add a bow.

తెలుగు లోకి
మారండి