diymainimage

Glowing Jellyfish

Materials

1. Paper bowls 2. White yarn 3. Glowing acrylic paint 4. Scissors 5. Zipper bags 6. Skewer

Materials

Instructions

Steps
Step 1
Paint the bowl inside and out. Use two or more coats of paint for a brighter "glow”. For the tentacles, cut 10 - 12 pieces of yarn approximately 36 inches in length. Place them in a zipper sandwich bag with several squirts of glow paint and seal the bag.
Steps
Step 2
Until the yarn is completely covered, adding more paint if necessary. If the paint is too thick, add a little water to the bag. Hang the yarn to dry.
Steps
Step 3
At the center of the bowl, punch two holes about 0.5 inch apart using a skewer or sharp pencil. Cut a piece of yarn approximately 40 inches long. Thread it through the two holes so that both ends come out the bottom of the bowl.
Steps
Step 4
From the inside of the bowl, pull the yarn up to form a small loop. Thread the tentacles through and roughly center them under the loop. Flip the bowl, pull the yarn taut and tie a double knot.
Steps
Step 5
Back on the inside, grasp the tentacles as one bunch and tie a single knot. Charge your jellyfish creation in bright light for at least 30 minutes. Turn out the lights and enjoy its luminous glow!

తెలుగు లోకి
మారండి