diymainimage

Heart Kite

Materials

Tissue paper in red and Pink 2. Yarn or twine 3. stick or scrap wood 4. Ribbon 110cm (44?) 5. Glue stick 6. Scissors 7. Craft knife 8. Tape

Materials

Instructions

Steps
Step 1
First strip off any leaves from your cane/stems using a craft knife to make the frame of your kite with. Bend your bits of cane to form a heart shape.
Steps
Step 2
Tape as indicated. Cut two shorter lengths to form a cross brace and tape them in place to keep your heart shape rigid. Tie the cross in the center. Now lay your frame over a sheet of red tissue paper and trim away excess paper.
Steps
Step 3
Fold edges over the frame and paste with the glue stick. Flip over and repeat steps 3-5 on the other side. To make fringe cut your folded tissue paper into 5cm (2?) wide strips.
Steps
Step 4
Cut fringing about 1cm (0.5?) wide, making sure not to cut all the way through. From outside paste on fringe rows, alternating between pink and red rows until the whole surface is covered.
Steps
Step 5
Take About 10cm (4?) from the top, poke a little hole and tie one end of a 30cm (12?) length of yarn of twine to the vertical brace. Tie the other end of the yarn about 2/3 of the way down the brace. Tie off your long yarn/twine to the middle of the string you have tied to the frame. Wind your long twine to a stick and finally, add the tail.

తెలుగు లోకి
మారండి