diymainimage

Pipe Cleaner Cans

Materials

1. Pipe cleaners 2. Canvas 3. Tape 4. Glue 5. Scissors

Materials

Instructions

Steps
Step 1
You will need about 8 of each for your two vertical colors and about 6 of each for your woven colors Depending on the size of your can.
Steps
Step 2
Once you have your two vertical colors laid out, tape them to your board. Using your other 4 sets of pipe cleaners, start weaving a pattern. Start with one, going over and under.
Steps
Step 3
For the next pipe cleaner, do the opposite, under and over. You will alternate weaving over and under, under and over until you have used all your pipe cleaners
Steps
Step 4
Trim the ends of the pipe cleaners. Using a hot glue gun secure one side of your weave to the can. It is much easier to put the glue on the can than on the pipe cleaners.
Steps
Step 5
Tuck the ends of the pipe cleaner inside the can and under the bottom, bend inward to secure. That’s it the can is ready to use!

తెలుగు లోకి
మారండి