diymainimage

Reusable Photo Frame

Materials

1. Popsicle sticks 2. Glue gun 3. Photo 4. Decorative items 5. Ribbon

Materials

Instructions

Steps
Step 1
Line up 8 Popsicle sticks side-by-side.  This will make the base of your frame. Glue one stick in the middle of the frame base. Glue the other two sticks to the left and right of the frame base. These three sticks will hold the frame base together.
Steps
Step 2
Flip your frame over and place a 4 by 6 inch (10.16 by 15.24 centimeters) photo on top. Be sure to leave a small gap between the glue and the edge of the photo.
Steps
Step 3
Press a stick down onto each line of glue. Make sure that the inner edge of each stick overlaps the photo. This will help hold the photo inside the frame. At this point, you can remove the photo.
Steps
Step 4
Place a drop of glue onto the top of each vertical stick. Lay a stick down horizontally across the two vertical sticks, pressing the ends into the glue. Repeat this for the bottom.
Steps
Step 5
Stack three sticks, one of the tops of the other, and secure them with glue. Make another stack just like this one. These stacks will make the bottom of your frame so that it can stand up. One stack will go on the front of your frame. The other stack will go on the back so that the frame stands up straight. Finally, decorate the frame and Slide a photo down through the top of the frame.

తెలుగు లోకి
మారండి